[Bundle Set] Octave V40 SE Integrated Amplifier + PMC Prodigy 1 Speaker + Chord ClearwayX Speaker Cable 3m

Octave V40 SE Integrated Amplifier + PMC Prodigy 1 Speaker + Chord ClearwayX Speaker Cable 3m Bundle Set

V40 SE Integrated Amplifier

Tube Complement : 4 x 6550
Power Output : 2 x 40 Watt into 4 Ohm
Frequency Response : 20 Hz – 70 kHz @ 40 W -1 / -3 dB, 5 Hz – 70 kHz @ 10 W -0 / -2 dB
Total Harmonic Distortion : < 0,1% @ 10 Watt into 4 Ohm
Signal-to-Noise Ratio : -110 dB / 40 W
Noise / Ripple : < 300 μV
Optimum Speaker Impedance : 3 – 16 Ohm
Minimum Speaker Impedance : 2 Ohm
No-load current : 28 mA - BIAS low, 34 mA - BIAS high
Connections : Inputs 4 x Line Level (Cinch), Outputs 1 x Tape, Pre-Out and Main-In
Features : ECO Mode, Bias Adjustment, Power Management
Configuration : Push Pull Pentode Circuit, Negative Grid Voltage adjustable for each tube, with 3 turn Precision Regulators, Wideband Output Transformers using Silicon steel PMZ Core, single Impedance Output, Optimum Load Impedance 3 - 10 Ohm, Nominal Speaker Impedance, Effieciency greater than 85dB, Amplifier remains stable with No Load and Output short circuited
Power Consumption : 350 W
Weight : 18.6 kg

PMC Prodigy 1 Speaker

Available Finishes: Silk Black
Crossover Frequency: 1.7kHz 
Horizontal Directivity: 80 degrees 
Vertical Directivity: 80 degrees
Dimensions: H 320mm 12.6” W 165mm 6.5” D 237mm 9.3” (+10mm optional grille) 
Drive Units: LF PMC 5.25”/133mm natural fibre long-throw LT™
HF PMC 27mm /1” soft dome 
Effective ATL™ Length: 1.91m 6.3ft 
Frequency Response: 50Hz - 25kHz (-3dB) 
Impedance: 6 Ohm 
Input Connectors: One pair 4mm binding posts 
Sensitivity: 87.5dB SPL 1W 1m 
Peak SPL: 123dB SPL 
Recommended Amp Power: 20 - 250W 
Weight: 4.5kg 9.9lbs ea.

*Free gift - Bfly Audio HKS-2 Absorber Set in 2024 Big Sale period

ClearwayX Speaker Cable 3m

Delivering performance at a good price. Chord Company Clearway (now ClearwayX) speaker cable has won WHAT HIFI? Best Speaker Cable award 2015, 2016 and 2017.  It uses a clever combination of materials to produce a speaker cable with a performance level that usually costs a lot more!

The ClearwayX uses 14 AWG multi-strand oxygen free copper conductors – big enough to bring control and definition to both book shelf and floor standing loud speakers.

The performance has recently been significantly improved by changing the insulation from FEP to XLPE. Hence the new name. Choice of insulation has a profound effect on a speaker cable and contributes to its neutrality. The wrong choice of insulation can produce unwanted tonal colouration.

The conductors are arranged in a twisted pair configuration before a soft PVC internal jacket is applied, this helps to minimise mechanical noise and also spaces the twin contra-wound foil shields in relation to the conductors.

Shielding a speaker cable brings subtle nuances that make music come alive. ClearwayX can transform the performance of your system particularly when it comes to coherence and timing.  It will let you further into your favourite music.

Available in terminated pairs and off the reel per metre. Most of our dealers have demonstration sets available, it will cost you nothing but your time to listen, and for a music lover you’ll hear its worth in the first few bars of music.

*All Discount offers will be subject to confirmation of stock availability. Richcoln shall reserves the right to reject the order in the event that any of the products requested are no longer available.
*減價貨品視乎實際庫存及訂貨情況而定。