[Thorens] TD 201 Turntable

Drive System: Belt Drive
Motor: DC Motor
Speed: 33 1/3 RPM, 45 RPM
Rotation Speed Variation: +/–2%
Wow and Flutter: 0.2%
Signal-to-Noise Ratio: 67dB or higher (A-weighted, 20kHz LPF)
60dB or higher (unweighted, 20kHz LPF)
Platter: Aluminum Die-cast
Diameter of Platter: 12" 300mm
Tonearm section: Alumi tube
Type: Static Balance, Straight
Effective Arm Length: 8.8", 223.6mm
Stylus Pressure Range: 0 to 4g
Supported Cartridge Weight: 3.5 to 6.0g
Overhang: 18.6mm
Anti-skating Adjustment: Supported
Cartridge Type: MM type (Audio-Technica AT3600)
Stylus Construction: Bonded Diamond
Frequency Response: 20Hz to 20kHz
Channel Separation: >18dB
Channel Balance: 2.5dB
Vertical Tracking Angle: 20 degrees
Supported Load Impedance: 47k ohms
Output Voltage: 2.5mV (1kHz, 3.54cm/sec.)
Stylus Pressure: 3.5g +/–0.5g
Cartridge Weight: 5g +/–0.5g
Head-shell Weight: 10g (including Screws, Nuts and Wires)

Analog Output
Connector: RCA Pin jack (Gold-plated)
Power: AC 100 to 240V, 50/60Hz
Power Consumption: 1.5W (less than 0.5W at Standby)
Overall Dimensions: (W x H x D) 420 x 355x 121mm
Weight: Approx. 3.9 kg