[Thorens] TD 202 Turntable

Drive System: Belt Drive
Motor DC Motor
Speed 33 1/3 RPM, 45 RPM
Rotation Speed Variation +/–2%
Wow and Flutter 0.2%
Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF)
60dB or higher (unweighted, 20kHz LPF)
Platter Aluminum Die-cast
Diameter of Platter 12", 300mm
Tonearm section Alumi tube
Type Static Balance, Straight
Effective Arm Length 8.8", 223.6mm
Stylus Pressure Range 0 to 4g
Supported Cartridge Weight 3.5 to 6.0g
Overhang 18.6mm
Anti-skating Adjustment: Supported
Cartridge Type: MM type (Audio-Technica AT-95E)
Stylus Construction: Bonded Diamond
Frequency Response: 20Hz to 20kHz
Channel Separation: >18dB
Channel Balance: 2.5dB
Vertical Tracking Angle: 20 degrees
Supported Load Impedance: 47k ohms
Output Voltage: 2.5mV (1kHz, 3.54cm/sec.)
Stylus Pressure: 2.0g +/–0.5g
Cartridge Weight: 5.7g +/–0.5g
Head-shell Weight: 11g (including Screws, Nuts and Wires)

Analog Output
Connector: RCA Pin jack (Gold-plated)
Power: AC 100 to 240V, 50/60Hz
Power Consumption: 1.5W (less than 0.5W at Standby)
Overall Dimensions: (W x H x D) 420 x 355x 121mm
Weight: Approx. 3.9 kg

**Displayed / Demo Item (6 months Warranty)**
For the overall conditions on demo or display items, please contact us for photos via WhatsApp 9149 2164 .
**此乃陳列品 / 示範用的產品 (半年保養)**
關於曾作陳列或示範用的產品的整體狀況，歡迎隨時通過WhatsApp 9149 2164 與我們聯繫，索取相關照片。

*All Discount offers will be subject to confirmation of stock availability. Richcoln shall reserves the right to reject the order in the event that any of the products requested are no longer available.
*減價貨品視乎實際庫存及訂貨情況而定。

*Please bear in mind that these products are sold at special prices and clearance prices, and therefore no refunds or exchanges will be honoured.
*由於這些產品是以特惠價和清倉價出售，因此客戶一經購買貨物後，不能要求更換或退款。